CFSPH - CONCRETE ACRYLIC FORTIFIER, 8610

  • MSDS: CFSPH
  • Manufacturer: QUIKRETE COMPANIES
  • Product Name: CONCRETE ACRYLIC FORTIFIER, 8610
  • National Stock Number: 5610-00N080766
Product Identification

Product ID:CONCRETE ACRYLIC FORTIFIER, 8610
MSDS Date:10/01/1996
FSC:5610
NIIN:00N080766
MSDS Number: CFSPH

Responsible Party
QUIKRETE COMPANIES
2987 CLAIRMONT RD SUITE 500
ATLANTA, GA 30329
US

Emergency Phone: 770-216-9580

Info Phone: 770-216-9580

Cage: IO174

Contractor
QUIKRETE COMPANIES
ATLANTA, GA 30345 US

Telephone: 404-634-9100

Cage: IO174

Ingredients

ACRYLIC POLYMER

CAS: 25068-63-7

OSHA PEL N/K

ACGIH TLV: N/K


AMMONIA (SARA 302/313) (CERCLA)

CAS: 7664-41-7

RTECS: BO0875000

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM;35 STEL

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION:VAPOR OR MIST CAN CAUSE
HEADACHE, NAUSEA AND IRRITATION OF THE NOSE, THROAT AND LUNGS. SKIN
CONTACT:IRRITATING UPON REPEATED OR PROLONGED CONTACT. EYE
CONTACT:SLIGHTLY IRRITATING.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:MOVE SUBJECT TO FRESH AIR.
EYES:FLUSH W/LARGE AMOUNT OF WATER FOR AT LEAST 15 MINUTES. SEE MD
IF IRRITATION PERSISTS. SKIN:WASH AFFECTED AREAS W/SOAP & WATER.

Fire Fighting

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONCOMBUSTIBLE AND NOT EXPLOSIVE.

Accidental Release

Spill Release Procedures:IF MATERIAL IS RELS/SPILLED, DAM UP TO LIM
SPREADING. MOP UP/ABSORB ON INERT MATL & PLACE IN CNTNRS. IF SPILL
OCCURS IN ENCLSD AREA, VENTILATE. POLYMER MAY BE SEPARATED FROM
WATER BY ADDN OF ALUM & FE RRIC CHLORIDE. NOTE:SPILLED EMULSION
IS(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NORMAL CLEANLINESS SHOULD BE OBSERVED.
STORE IN A COOL PLACE, AVOID FREEZING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE SATURATED CLOTHING & WASH CONTACTED SKIN
AREAS W/SOAP & WATER.
Supplemental Safety and Health
SPILL PROC:VERY SLIPPERY. USE CARE TO AVOID FALLS. LATEX WILL LEAVE A
FILM ON DRYING.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
pH:9.5-10
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY WHITE LIQUID W/SLIGHT AMMONIACAL ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . FOR LARGE QTYS, PLACE IN SETTLING POND & ADD FERRIC
CHLORIDE & LIME. DECANT WATER. DISPOSE OF SOLID IN LANDFILL.
EMULSION CAN BE INCIN ERATED DIRECTLY UNDER APPROPIRATE CONDITIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.